Lab Resources

Electrical and Computer Engineering (ECE) students may request a lab locker to keep their belongings. The lockers are not to be used to stockpile equipment. Select the Student Guide menu below, and follow the provided steps to request a lab locker. Scroll down to view useful manuals, how-to guides, and more!

Locker Request - Steps & Guides

Contact your instructor with questions or visit the Department of ECE with general questions.
ECE instructors, please select the Instructor Guide and follow the steps to assign student lockers and review the end-of-lab procedures.

Click on the course name to view and download individual locker checkout forms. Contact your instructor with questions.
These forms only work with Internet Explorer. Don't have Internet Explorer? Download the form and use Acrobat.

EE-2049 Measurements & Circuits Required
Click for Details
EE-2449 Digital Logic No
EE-3709 Electronics Required
Click for Details
EE-3810 Bio-Med Engineering No
EE-4330 Power Electronics No
EE-4961 Design Station No

Follow the steps below to obtain a student locker at the first meeting of your lab.

Missing media item. Student Locker Checkout Guide

  1. Navigate to the /ecst/ece/labs website.
  2. Click on the EE-XX link under the “Locker Request Forms” column on the website to access the form.
  3. Students should work in groups of two or more.
  4. Both students shall type all required information on the EE-XX pdf form.
  5. If a single student needs a locker, enter any character for each field of the 2nd student.
    The error message “This Form is Incomplete” will disappear when all information is entered.
  6. Print the completed form.
  7. Bring a school ID and the completed form to your instructor.

Provided below are the steps to assign student lockers and the end-of-lab procedure steps.

Missing media item. Instructor Locker Checkout Guide

Collect the Locker Request Form & assign student lockers.

  1. Obtain a Locker Content forms from the instructor's locker. The combination was emailed to you.
  2. Collect the Locker Request form and Student ID from the requesting student.
  3. Compare the Student ID to the information on the Locker Request form to validate the student's identity.
  4. Return the Student Id to the requesting student.
  5. Enter the assigned locker number into the "Staff, Enter locker number here field on the Locker Request form.
    The assigned locker number can be found on the Locker Content form.
  6. Give the student the Locker Content form for their assigned locker.
  7. Keep the Locker Request Form, collected from the student, in the Instructor Locker.
  8. Return any unassigned Locker Content forms to the instructor locker and lock them.

At the end of each lab, instructors need to do the following.

  1. Lock the instructor's locker.
  2. Have the students turn off all equipment, including the computer and monitor.

Room Access Request

eddie eagle one card swipe action

One Card Request

Certain classrooms are installed with card readers and electrified locks, which require the use of your Golden Eagle One Card with an active PIN. The College of ECST is extending Cal State LA facility access to the Computer Lab by providing you with OneCard card access. Click on the Card Access Form button below to download and complete your request. Contact your instructor with questions.


Visit the Cal State LA Golden Eagle One Card Door Access webpage for more information on Door Access Authorization, instructions, and rules. The Golden Eagle One Card is the property of Cal State LA and is non-transferable. Use of the Card constitutes acceptance of all the University rules, regulations, and procedures. 

Additional Resources

Click on the title below to view and download information. Don't hesitate to get in touch with your instructor for additional assistance or questions.

Department of ECE

Arlette Hattar, Department Coordinator
5151 State University Drive, Los Angeles, CA 90032 | E&T A-342
TEL: (323) 343-4470 | FAX: (323) 343-4547 | Email: [email protected]
Hours of Operation: 9 am to 6 pm, Monday through Friday