Skip to the content
Link back to Cal State L.A.
Library South, Palmer Wing 1083
Phone: (323) 343-6170
ITS Help Desk Logo

Using Equipment in Simpson Tower Annex E-184

Simpson Tower Annex

  1. Arrive early for your class. The Lecture Hall should be unlocked. If the door is locked, contact Campus Police at ext. 3-3700 and someone should be out to unlock it in 10-30 minutes.

Simpson Tower Annex Entrance

  1. Lower the Projection Screen by pressing the switch, which is to the left of the chalkboard.

Simpson Tower Annex Stage  Projection Switch

  1. This console has been modified and reduced in size. The procedure to operate the Console has also been varied.

    One Piece Console
     

  2. Unlock the console using the four-digit code that was provided to you. Every console has a different combination. You must push in the shackle then pull it to release the padlock.

    Padlock Four digit code combination

  1. The top of the console contain the monitor on the left and the Laptop port on the far right corner.

    MAC Monitor Laptop cable
     

  2. Inside the console, you will find a DVD/VCR combo at the top and a PC and Mac at the bottom right.  To the left of the DVD/VCR combo are the keyboards, and below it is the Microphone.

Equipment in Console Equipment in Console

top

  1. Turn on the computer that you are going to use.  PC users will need to log on using their NIS accounts.

PC and Mac Computers

noteNote: 
If you can't log on, click on the Option button located on the bottom right
of your Log On screen to make sure the domain is NIS.

Log in Screen Login screen

  1. The remote control for the Multimedia Projector is located under the DVD/VCR player.  Point it directly at the Multimedia Projector, and press the Power button to turn it on. It takes a minute to warm up.
    • To display what is on the computer, press the button labeled Comp1
    • To display what is on the Laptop or Document Camera, press the button labeled Comp2/YCbCr.
    • To display what is playing on the DVD/VCR Player, press the button labeled Video

    Multimedia Projector Control
     

  2. When you first come in the Multimedia Projector should have a steady orange light.

    Orange - Projector is OFF

    When you press power on the remote the steady orange light will change to a blinking green light. This means that the Multimedia Projector is warming up. After it finishes that phase you will see a steady green light, meaning that it is done warming up.

    Projector is Warming up Projector is ON
     

  3. To use the Laptop, connect the VGA Laptop cables to the External Monitor Port.  Remember to change your Laptop resolution to 800X600. To display what is on the laptop, press the button labeled Comp2/YCbCr from the Multimedia Projector remote control.

    Laptop Cable

    noteNote:  You can adjust the audio volume by pressing on the Volume button on the Multimedia Projector control.

    top
     

  4. The Remote Control for the Multimedia Projector is located above the DVD/VCR combo. Point it directly at the Multimedia Projector, and press the Power button to turn it on. It takes a minute to warm up.
  • To display what is on the computer, press the button labeled Comp1.
  • To display what is playing on the DVD/VCR, press the button labeled Video.
  • To display what is on the laptop, press the Comp2/YCbCr

Multimedia Projector Control

  1. To use the DVD/VCR combo, power on the system.  Select the device (DVD or VCR) you want to use from the Remote Control.  To display what is playing on the DVD/VCR, press the button labeled Video from you Multimedia Projector remote control.

DVD/VCR Combo DVD/VCR Remote Control

noteNote:
You can adjust the volume for the audio using the Multimedia Projector control, 
by pressing on the Volume button.

  1. To use the Document Camera, power on the system. Swing out the left and right lamps and rise and adjust the camera lens before use.  Controls on the front include pause, zoom in, and zoom out buttons. In addition to displaying traditional transparencies, this device can display any three dimensional object.  To display what is on the Document Camera, press the button labeled Comp2/YCbCr from the Multimedia Projector remote control.

    Document Camera Power Button Document Camera Left Lamp Document Camera Right Lamp Document Camera Lense Document Camera Control Panel

    top
     

  2. The Microphone is On. You can adjust the Mic volume using the Mic Level knob.

    Amp All  Microphone

  1. To turn off the Multimedia Projector, aim the Remote Control at it and press the Power button again. The steady green light will change to a flashing orange light, which indicates that it is cooling down. After it cycles through this phase, the light will change to a steady orange light as you saw it when you first came in, meaning that it is once again off.

    Projector is ON Orange - Projector is Off

  2. When you are done using the console, relock the padlock by changing the tumblers (numbers) and pushing the shackle in. Pull on it to be sure it is locked.

Padlock

  1. When leaving the Lecture Hall, you may leave the doors unlocked. Eagle Patrol locks them every night.

Simpson Tower Annex Entrance

top