Using Equipment in King Hall Lecture Hall 2

1. Arrive early for your class. The Lecture Hall should be unlocked. If the door is locked, contact Campus Police at ext. 3-3700 and someone should be out to unlock it in 10-30 minutes.

   

2. Lower the projection screen by pressing the switch, which is located on the cabinet in front of the chalkboard.

   
    

3. The KH Lecture Hall 1's computer console has been modified and reduced in size.

   
    

4. Unlock the padlock using the four-digit combination you were provided. Every console has a different combination. You must push in the shackle, then pull it to release the padlock.

   
    

5. The top of the console contains the monitors on the right and the VGA Laptop cables in the middle. To the right of the console is the document camera.

   
    

6. Inside the console, you will find a DVD/VCR combo on the top and a PC and Mac on the bottom right. To the left of the DVD/VCR combo are the keyboards and below is the microphone.

   
    

7. Turn on the computer that you are going to use. PC users will need to log on using their AD account.

   Note: 
   If you can't log on, click on the Option button located on the bottom right
   of your Log On screen to make sure the domain is AD.

   

   top
    

8. The remote control for the multimedia projector is located above the DVD/VCR combo. Point it directly at the multimedia projector, and press the Power button to turn it on. It takes a minute to warm up.
   • To display what is on the computer, press the button labeled Comp1.
   • To display what is playing on the DVD/VCR, press the button labeled Video.
   • To display what is on the laptop or document camera, press the button Comp2.

   
   

9. When you first come in, the multimedia projector should have a steady orange light.

   

   When you press power on the remote the steady orange light will change to a blinking green light. This means that the multimedia projector is warming up. After it finishes that phase, you will see a steady green light. This means it is done warming up.

10. To use the laptop, connect the VGA Laptop cables to the External Monitor Port. Remember to change your laptop resolution to 800X600. To display what is on the laptop, press the button labeled Comp2 from the multimedia projector remote control.

    

    Note:  You can adjust the volume for the audio using the volume buttons on the multimedia projector control.

11. To use the DVD/VCR combo, power on the system.  Select the device (DVD or VCR) you want to use from the Remote Control. To display what is playing on the DVD/VCR, press the button labeled Video from your multimedia projector remote control.

    

    Note: You can adjust the volume for the audio using the volume buttons on the multimedia projector control.

    top
    

12. To use the document camera, power on the system. Swing out the left and right lamps and rise and adjust the camera lens before use. Controls on the front include pause, zoom in, and zoom out buttons. In addition to displaying traditional transparencies, this device can display any three dimensional object. To display what is on the document camera, press the button labeled Comp2/YCbCr from the multimedia projector remote control.

    
    

13. The microphone is On. You can adjust the microphone volume using the Mic Level knob.

     
     

14. To turn off the multimedia projector, aim the remote control at it and press the Power button again. The steady green light will change to a flashing orange light, which indicates that it is cooling down. After it cycles through this phase, the light will change to a steady orange light as you saw it when you first came in, meaning that it is once again off.

    
     

15. When you are done using the console, relock the padlock by changing the tumblers (numbers) and pushing the shackle in. Pull on it to be sure it is locked.

    
     

16. When leaving the Lecture Hall, you may leave the doors unlocked. Eagle Patrol locks them every night.

top